1. Home

1.1 Fleet Eco-Score for the Current Month (optional)

Eco-driving score for all vehicles in the fleet.

This score is displayed if your fleet has the eco-driving option enabled and if it has been activated in the general settings:
Settings / General Settings / Home page: display the fleet eco-score on the home page > yes

See eco-driving report: 3.4 Ecodriving reports

1.2 Your fleet

Vehicles can be filtered by entering the vehicle name, make, ID, etc. in the Filter vehicles field. It is also possible to select a group that has been created beforehand (see 4.3 Manage vehicles).

1.2.1 Vehicles moving

List of vehicles currently in motion.

This table may contain:

1.2.1.1 Vehicles

Lists all vehicles in the fleet that are currently moving, including:

• model
• license plate
• vehicle ID

1.2.1.2 Status

Displays data for vehicles in motion such as:

• how long the vehicle has been moving;
• the vehicle’s estimated total mileage (provided by satellite, which explains possible differences with the odometer reading, unless the vehicle is equipped with CAN bus);
• the unit battery level (depending on the vehicle type, e.g. trailer);
• beacons (identifier of a tool present in the vehicle);
• temperature (current temperature measured by the sensors installed in the vehicle);
• stationary status;
• driver identification, if variable;
• fuel level (optional);
• RPM (optional)
• PTO – Power Take-Off

1.2.1.3 Speed

Real-time vehicle speed, calculated by GPS.

1.2.1.4 Location

Displays the vehicle’s real-time location. If the vehicle is located within a previously saved geographical zone, the name of that zone will be displayed. By clicking on it, the zone can be edited. Otherwise, a pin-shaped icon will appear at the end of the address. By clicking on this pin, it is possible to create a geographical zone centered on the current position (see 4.6 Manage zones).

1.2.1.5 Actions

•  Daily report: all trips made by the vehicle during the last day on which the vehicle was driven (see 3.2.1 Daily report for a vehicle)

•  Monthly report: all trips made by the vehicle during the current month (see 3.2.2 Summary report for a vehicle);

• Today’s trips: all trips displayed on a map;

• Track vehicle: real-time vehicle tracking on the map.

1.2.2 Stationary vehicles

List of vehicles currently stopped.

This table includes the same options as Vehicles in Motion (see 1.2.1 Vehicles moving).

1.2.3 Vehicles out of signal

List of vehicles currently outside the network or satellite coverage. If a vehicle remains out of coverage for an unusually long time, please report it to support@bizztrack.eu